How to remove the brother printer error 30? |
Posted: April 12, 2019 |
There are lots of errors we can see in the machines and so those are seen in the printers also. Because of these technical errors, you may not able to have your work done. Brother printer users also have to stop printing with their printers because of these errors. Brother printer error 30 is also one of those which you can see displayed on the screen. There are lots of reasons for this error like due to failure in the printer’s print head carriage that refuge to return to its original position to far right of the unit, then because of displacement of the springs that are located on each side of the carriage and the last cause is locked out of the cartridge which needs to be placed securely in place. Here we discuss some methods which can help you in removing this brother printer error 30. Brother Printer Support team is also there to help you in removing technical errors from the brother printer. Step 1Start this process by opening the printer cover with the help of tabs on the printer and you can find the buttons on the left and right side of the machine. Then you have to shift the printhead to the center. Now you need to check if there is any piece of paper, staple, or the paper clip and then remove those if you find any. After finishing this step, now you have to proceed to the next step. Step 2Here, you have to hold the scanner cover with the help of the tabs of the cove which is placed on the left and right side of the printer. Now you need to slide the print head over to the right side under the cover so that you can confirm that the whole encoder strip is cleaned. To clean the encoder strip, take the help of a lint-free cloth and then tightly hold the encoder strip on both sides. Then you need to scour the cloth down the strip from one to another end for at least three times. After finishing this second step, you can remove the brother printer error 30. If the error 30 is still there, then go through the next step. Step 3Now you have to check the position of the encoder strip if it is in its place or not. Next, you have to open the printer and then reinsert the strip again. In the final step, you have to restart the printer and to check the print quality by printing a test page. This process can help you in removing the brother printer error 30. To help you in solving the brother printer issues, Brother Printer Support is always there to help you. Brother Printer Support team is a third party service provider who is ready to solve the printer related issues. To talk with the experts of Brother Printer Support, call at +1-888-621-0339 and thus you can get a solution to your printer issues. You can enjoy their service at a minimal price by subscribing to the monthly or yearly packages offered by Brother Printer Support.
|
||||||||||||||||
|